Cisco 640-802 exam guaranteed,
Cisco PassGuide 640-802 Exam Prep – Guaranteed Results
Pass the Cisco 640-802 exam guaranteed, using Testking 640-802 resources crafted by real 640-802 Testking professional online trainersQuestion:344
Exhibit:
A.
Answer: A
Question:345
Exhibit:
A.
Answer: A
Question:346
Exhibit:
A.
Answer: A
Question:347
Drag Drop
A.
NAT addresses can be divided into two categories: inside network and outside network which are defined based on the NAT functions. The device that has NAT functions connects the inside and the outside network like a bridge, the NIC connected to the inside network is called “inside” , the NIC connected to the outside network is called “outside”, that is to say, the inside addresses are used by the inside network devices, while the outside addresses are used by the outside network devices.
Addresses can also be divided into local and global addresses. Local address refers to the address that can be seen and used by the inside network devices; while global address refers to the address that can be seen and used by the outside network devices.
These four addresses are :
Inside local address is the IP address used by the inside network devices, which is often a private address.
Inside global address is a public address provided by ISP. It is often used when the inside network devices communicate with the outside network devices.
Outside local address is the address used by the outside network device as it appears to the inside network device. It is not necessarily a public network address.
Outside global address is the real address used by the outside network devices.
IP packets sent from the inside network devices regard “inside local address” as the source address and “outside local address” as the destination address. When the packets reach the “inside” interface of the NAT equipment, the addresses will be translated into “inside global address” and “outside global address” , the packets will be out from the “outside” interface .
In the same way, IP packets sent from the outside network devices regard “outside global address” as the source address and “inside global address” as the destination address. When the packets reach the “outside” interface of the NAT equipment, the addresses will be translated into “outside local address” and “inside local address”, the packets will be out from the “inside” interface.
Answer: A
Question:348
Refer to the exhibit. Complete this network diagram by dragging the correct device name of description name or description to the correct location. Not all the names or descriptions will be used.
A.
Answer: A
Question:349
Drag the Frame Relay acronym on the left to match its definition on the right.(Not all acronyms are used.)
A.
Answer: A
Question:350
On your company LAN, the failure of the power supply resulted in the malfunction of the switch.
So, the switch is replaced with a Cisco Catalyst 2950 series switch. Which action will you take to make this new switch be the root bridge on the network?
A. Reduce the bridge priority value.
B. Increase the VTP revision number for the domain.
C. Reduce the root path cost on the switch ports.
D. Assign the switch an IP address with the lowest value.
Answer: A
Question:351
The left describes the types of cables, while the right describes the purposes of the cables.
Drag the items on the left to the proper locations. (Not all items can be used.)
Crossover cable is used to connect the same devices. Straight-through cable is used to connect different devices
A.
Answer: A
PassGuide Cisco CCNA 640-802 Exams
- Free passguide 640-802 practice questions
- Free passguide 640-802 cisco test
- Free passguide cisco ccna 640-802 v3.38 1
- Free passguide 640-802 exam dumps
- Free Cisco 640-802 Actual Questions and Answers
- Free passguide ccna 640-802 labs
- Free passguide ccna 640-802 simulation labs
- Free new passguide ccna 640-802 v3.38
- Free passguide ccna 640-802 braindumps
- Free New CCNA 640-802 Question Answer 1
