Free Download passguide cisco 640-802 test | Latest Cisco CCNA Certification Dumps

passguide cisco 640-802 test

By PassGuide CCNA Training Materials and Practice Tests | April 1, 2010

Cisco 640-802: Cisco Certified Network Associate (CCNA) Exam
About Exam
Exam number/code: 640-802
Exam name: Cisco Certified Network Associate (CCNA)
Exam no. of questions: 50-60 Questions
Duration: 90 minutes
Passing score: 825
Question types: Multiple choice questions (MCQ’s), Multiple choice single answer, Multiple choice multiple answer, Drag and drop & Simulations (optional)
Cisco Certified Network Associate (CCNA) is the composite exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 and the Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 courses. This exam tests a candidate’s knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include connecting to a WAN; implementing network security; network types; network media; routing and switching fundamentals; the TCP/IP and OSI models; IP addressing; WAN technologies; operating and configuring IOS devices; extending switched networks with VLANs; determining IP routes; managing IP traffic with access lists; establishing point-to-point connections; and establishing Frame Relay connections.

Describe how a network works
Configure, verify and troubleshoot a switch with VLANs and interswitch communications
Implement an IP addressing scheme and IP Services to meet network requirements in a medium-size Enterprise branch office network.
Configure, verify, and troubleshoot basic router operation and routing on Cisco devices
Explain and select the appropriate administrative tasks required for a WLAN
Identify security threats to a network and describe general methods to mitigate those threats
Implement, verify, and troubleshoot NAT and ACLs in a medium-size Enterprise branch office network.
Implement and verify WAN links

Question:410
Refer to the exhibit. The network manager is evaluating the efficiency of the current network design. RIPv2 is enabled on all Layer 3 devices in the network. What network devices participate in passing traffic from the PC at 10.10.1.7 to File Server at 10.20.1.6 in the order that they will forward traffic from source to destination?

A. Switch1, Switch2
B. Switch1, Switch2, Router2, Switch2
C. Switch 1, Router1, Switch1, Switch2
D. Switch1, Router1, Router2, Switch2

Answer: D

Question:411
The administrator ais unable to establish connectivity between two Cisco routers. Upon reviewing the command output of bot the problem?

A. Authentication needs to be changed to PAP for both routers.
B. Serial ip address of routers are not on the same subnet.
C. Username/password is incorrectly configured.
D. Router name are incorrectly configured.

Answer: C

Question:412
Refer to the exhibit. Router A has intefaces with addresses 192.168.1.1 and 172.16.1.1. Router B, which is connected to rourer address 172.16.1.2 and 10.1.1.2.

Which sequence of commands will configure RIPv2 on router B?

Answer: A

Question:413
Refer to the exhibit. S0/0 on R1 is configured as a multipoint interface to communicate with R2 and R3 in this hub-and-spoke. While testing this configuration, a technician notes that pings are successful from hosts on the 172.16.1.0/24 network to host 172.16.2.128/25 networks. However, pings between hosts on the 172.16.2.0/25 and 172.16.2.128/25 networks are not successed problem?

A. The ip subnet-zero command has been issued on the R1 router.
B. The RIP v2 dynamic routing protocol cannot be used across a Frame Relay network.
C. Split horizon is preventing R2 from learning about the R3 networks and R3 from learning about the R2 networks.
D. the 172.16.2.0/25 and 172.16.2.128/25 networks are overlapping networks that can be seen by R1, but not between R2
E. The 172.16.3.0/29 network used on the Frame Relay links is creating a discontiguous network between the R2 and R3

Answer: C

Question:414
Refer to the topology and router output shown in the exhibit. A technician is troubleshooting host connectivity issues on the switches. The hosts in VLANs 10 and 15 on Sw11 are unable to communicate with hosts in the same VLANs on Sw12. Hosts in the Admin VLAN are able to communicate. The port-to-VLAN assignments are identical on the two switches. What could be the problem?

A. The Fa0/1 port is not operational on one of the switches.
B. The link connecting the switches has not been configured as a trunk.
C. At least one port needs to be configured in VLAN 1 for VLANs 10 and 15 to be able to communicate.
D. Port FastEthernet 0/1 needs to be configured as an access link on both switches.
E. A router is required for hosts on SW11 in VLANs 10 and 15 to communicate with hosts in the same VLAN on Sw12.

Answer: B

Question:415
Refer to the exhibit. When running EIGRP, what is required for RouterA to exchange routing updates
with RouterC?

A. As numbers must be changed to match on all the routers
B. Loopback interfaces must be configured so a DR is elected
C. The no auto-summary command is needed on Router A and Router C
D. Router B needs to have two network statements, one for each connected network

Answer: A

Question:416
You have finished physically installing an access point on the ceiling at your office. At a minimum, which parameter must be allow a wireless client to operate on it?

A. AES
B. PSK
C. SSID
D. TKIP
E. WEP

Answer: C