Free Download The Discussion Of CCNA Advice For You | Latest Cisco CCNA Certification Dumps

The Discussion Of CCNA Advice For You

By PassGuide CCNA Training Materials and Practice Tests | November 6, 2008

# 01 nikalex

I am currently planning to start studying for my CCNA certification.

Is self study the best one or attending classes? Which books are most recommended for CCNA Routing and Switching?

Is it better to take CCNA once or start from ICND1 and ICND2?

# 02 Kailen Harper

I have allways felt the two exam option and self study is the best way to move forward with a CCNA. The Cisco press books by Wendel Odom for ICND1&2 are an excelent choice. Most importantly though is to get a couple of routers or Dynamips and practice. Learning it in a book and actually doing it are very different things. Watch all of the videos on the site here and play the binary game A LOT. Subnetting is the most important thing to learn since without it the tests will take significantly longer to complete. And time is a valuable resource on the test.

Get the first book, watch the videos, ask a lot of questions in the forums and just keep working at it. Remember even the CCIE’s had to start somewhere.

# 03 Ryan Helton

Yup, I agree with the poster above. I just passed the ICND1 exam and I felt very prepared having used the ICND1 study guide by Wendell Odom and the CCNA study guide from sybex. I also practiced ios commands using GS3.

# 04 nikalex

Thank you so much for this valuable advice.I heard Cisco has many versions of routers and switches.

Which ones would you most recommend me for practice? I would move those ones cheap and which can be used for CCNP preparation as well.

# 05 Garry Richardson

Hi there, i also agree with all comments above! i passed CCENT 8 weeks ago and nearly read ICND2. I used Cisco Press materials and CBT nuggets, these 2 products go together a treat!

In regards to lab equipmment, a lot of people say you dont need any equipment to get pass CCENT / CCNA but i purchased for CCENT, 2 2500’s and 1 2950 CAT Switch I found it helped a lot, plus its fun playing with live Cisco IOS.

For ICND2 i’ve purchased another CAT 2950, another 2500 and a 2600. The ICND2 explorers into STP, VTP, Inter-Vlan-Routing and much more. The kit i have now, allows me to setup a network, working with all CCNA layer 2/3 protocols and much more.

I would advise anyone to spend between £100-£200 on some Cisco Kit when working through the Certs.

# 06 Mike Keedy

I’m following the self study track too, I find the Cisco Press books excellent, use the Boson simulator software and have a few 2nd hand routers and switches for practice.

Good luck in your certification, I’m planning to go straight for the CCNA exam, I hope I’ve made the right descision

# 07 Ryan Helton

Hey Mike, I’d say you’re making the right choice just going for the CCNA exam all at once. To tell you the truth I wish I had just done that becuase I feel like I was almost overprepared for the ICND1 and with a little more study of the ICND2 concepts I could have just knocked out the whole thing in one test.

# 08 Kerry LeBlanc

I agree with all the good advice here. I decided to go the one exam path myself. For resources I am using the Cisco Press set by Wendell Odem. I also have Todd Lammle’s book (Sybex Study Gude) which is excellent. I bought the Boson Exam simulator and the NetSim as well. I think the Boson exam environment is the most accurate for feel and look.

I also purchsed some equipment from CiscoKits.com. The books and simulators are great, but nothing compares to laying your hands on the real deal. I got two routers, one switch and a great lab book for about 250.00. Plus the equipment will be what I need as I move on to the CCNP.

Another good resource is the Brynat Advantage. Fairly inexpensive.
Chris Corino’s 3 Questions About CCNA

I figured this was going to be a short post, but the more I think about it, the longer it gets, LOL. So I am just going to throw out a couple questions I am confused about, and if you can answer ANY of them, it would be greatly appreciated! Thanks in advance! Hope everyone’s work-week is going well!

1. I am planning for my CCVP due to work requirements. I’m extremely excited. However, I have to get my CCNA or CCNA Voice cert. first. Which do you recommend? Pro/cons?
2. If I go for the CCNA, I either take the CCNA exam or take the ICND1 and ICND2, correct? Recommendations?
3. When I look up the CCVP, it says the prerequisites are “CCNA (until June 24, 2009)”. Why is there a deadline? Is the exam being retired or changed?

More of a story, not really a question: Not even knowing there was a “CCNA Voice” certification, I bought a book yesterday from Barnes and Noble. I couldn’t understand how it was possible, but listen to this: I can either buy the CCNA Cert. Library for $95 that trains you on JUST the CCNA. OR I could buy a CCNA cert. Library for $60 that trains you on the CCNA, ICND1, and ICND2, along with a 1-hour training DVD, and 2 CD’s with the books on PDF, and 400 practice questions. Anyone see anything wrong with that picture?!? They were both made by Cisco, but the $60 one was a “Barnes and Noble Exclusive Edition”. Needless to say, I got the $60 one.

Helpful answer form Timothy Walsh:

You’ll need to do it in the following order:

1. CCNA (Note that you can break this into two tests, ICND1 which gets you the CCENT certification followed by the ICND2 which then makes you a CCNA)
2. CCNA-Voice (This certification requires you to first be a CCNA, hence step 1. This is a new cert which is why the CCVP has the deadline you spoke of, basically Cisco is allowing those of us already working on the CCVP to finish it before requiring the CCNA-Voice cert.)
3. CCVP (Currently only requires the CCNA, but after 6/24/09 will require the CCNA-Voice cert)